Liquidación amplificadores RAYSONIC

Responder
Avatar de Usuario
RRH Audio
Mensajes: 43
Registrado: Sab 04 Nov 2006 12:48
Ubicación: Las Palmas de Gran Canaria
Contactar:

Liquidación amplificadores RAYSONIC

Mensaje por RRH Audio » Mar 04 Nov 2008 09:40

Liquidamos estos magníficos amplificadores a válvulas:

RAYSONIC SE 30A

Imagen

ESPECIFICACIONES

Class A, triode, single-end design.
Output power: 18 watts ×2 channels.
Extended frequency range output transformers.
Heavy duty power transformer.
All single paths are point to point wiring.
Six EL-34 power tubes are individually biased
Circuit built with high quality electronic components.
Stainless steel chassis.
Vacuum tubes: EL34 x 6,12AT7EH x 2, 12AU7 x 4, 5Z4 x 2
Output power: 18w. x 2 channels
Input sensitivity: 760mv
Input impedance: 100kΩ
Harmonic distortion: <1%
Frequency response: 8Hz - 52kHz
S/N ratio: 88db
Input: 4 sets
Speaker output impedance: 4 or 8 ohms
Power consumption: 255 watts.
Dimensions: 47L x 33W x 21H (cm)
Weight: 28kg

PVP: 2320€. DESCUENTO 30%: 1624€

RAYSONIC SP 120

Imagen

ESPECIFICACIONES

Class AB, ultra-linear design
Two pairs of KT-88 output tubes operate in Ultra-linear- 50 watts x 2 channels.
Minimal negative feedback with precision RC circuitry for more linear performance
power tubes are individually biased
Remote volume control
Stainless steel chassis
Vacuum tubes: KT-88 x 4, 6SN7 x 2, 12AX7 x 2
Output power: 50w. x 2 channels
Input sensitivity: 450mv
Input impedance: 100kΩ
Harmonic distortion: <1%
Frequency response: 20Hz - 40kHz
S/N ratio: 88db
Input: 4 sets
Speaker output impedance: 4 or 8 ohms
Power consumption: 262 watts.
Dimensions: 44L x 33W x 19.5H (cm)
Weight: 20.6kg
Color plata

PVP: 2088€. DESCUENTO 30%: 1460€

Avatar de Usuario
RRH Audio
Mensajes: 43
Registrado: Sab 04 Nov 2006 12:48
Ubicación: Las Palmas de Gran Canaria
Contactar:

Re: Liquidación amplificadores RAYSONIC

Mensaje por RRH Audio » Mié 03 Dic 2008 11:29

:arrow:

Responder